太陽光パネル廃棄物から持続可能なインフラへ:機械の電化と系統脱炭素化を通じて
From Solar PV Panel Waste to Sustainable Infrastructure Through Machinery Electrification and Grid Decarbonization (原題)
Shaghayegh Ostovar Ravari, Dilshika Heenatigala Kankanamge, Andrea Ferrantelli, Sanna Syri
🤖 gxceed AI 要約
日本語
太陽光パネル廃ガラス粉末と焼成石膏を用いた土壌安定化バインダーについて、cradle-to-gateのLCAを実施した研究。電動機械と低炭素北欧電力網を前提に、2030年のフィンランド電力CO2強度をPLEXOSモデルで推計し、2024年比で約23%の影響削減を示す。電力炭素強度が気候性能の主要因であり、石膏含有量が高温焼成に起因する排出を支配することを明らかにした。
English
A cradle-to-gate LCA of a soil-stabilization binder made from recycled PV-glass powder and sintered gypsum, evaluated under electrified machinery powered by the low-carbon Nordic grid. Using a PLEXOS-based Nordic power model, 2030 Finnish grid CO2 intensity cuts impacts ~23% versus 2024. Electricity carbon intensity is the dominant driver, while gypsum content dominates composition-related emissions due to high-temperature sintering.
Unofficial AI-generated summary based on the public title and abstract. Not an official translation.
📝 gxceed 編集解説 — Why this matters
日本のGX文脈において
日本でも太陽光パネルの大量廃棄時代を迎え、リサイクル材の建設利用と施工電化は循環経済・GX政策の論点。電力炭素強度を軸とした評価手法は、再エネ導入と電化を組み合わせた脱炭素投資判断に示唆を与える。
In the global GX context
Adds empirical LCA evidence on coupling circular material recovery with grid decarbonization and construction electrification—relevant to global debates on embodied carbon, clean-energy procurement, and circular-economy pathways in infrastructure.
👥 読者別の含意
🔬研究者:電力炭素強度と材料組成がLCA結果をどう左右するかの感度分析手法が参考になる。
🏢実務担当者:建設・素材企業は電化施工と低炭素時間帯シフトが排出削減に効くことを投資判断に活用できる。
🏛政策担当者:PV廃棄物リサイクルと系統脱炭素を結びつけた循環経済政策設計の根拠になりうる。
📄 Abstract(原文)
This chapter presents how circular materials and electrified machinery can decarbonize smart cities. A cradle-to-gate LCA is conducted for a soil stabilization binder made from recycled PV-glass powder and sintered gypsum. It then evaluates the same process under scenarios where material processing and on-site construction are performed with electric machinery powered by the low-carbon Nordic grid. The 2030 CO2 intensity for Finland is derived from a Nordic power market model built with the PLEXOS energy system modelling tool. The findings show that the carbon intensity of electricity is the primary driver of climate performance, with a shift from 2024 to 2030 reducing impacts by about 23% across all blends. Gypsum content dominates composition-related emissions due to high-temperature sintering, and the choice of normalization basis affects comparisons. Operational levers, such as scheduling energy-intensive steps in lower-carbon hours, can further reduce impacts and support scalable, smart-city, circular-economy pathways.
🔗 Provenance — このレコードを発見したソース
- crossref https://doi.org/10.4018/979-8-2600-5156-6.ch004first seen 2026-11-16 06:31:22
🔔 こうした論文の新着を逃したくない方は キーワードアラート に登録(無料・3キーワードまで)。
gxceed は公開メタデータに基づく研究支援データセットです。要約・翻訳・解説は AI 支援で生成されています。 最終的な解釈・検証は利用者が原典資料に基づいて行うことを前提とします。