This page provides an English interface to the gxceed GX paper corpus. The corpus aggregates papers from 14 contributing scholarly metadata sources and uses AI-assisted classification to identify signals related to measurement, policy narratives, outcomes, implementation, industrial adoption, and verification.
The goal is not only to discover papers, but to observe how GX research is distributed across research substance, implementation narratives, external expectations, implementation substance, and judgment formation.
Summaries are AI-assisted. Always refer to the original paper for authoritative conclusions.
Showing 21–40 of 1796 papers
Jiageng Li, V. Sivasankar, Kiyoshi Omine +3
This paper examines biogenic-derived calcium oxide (CaO) as a low-carbon stabilizer for soft soil improvement, positioning it as a sustainable alternative to conventional cement-based binders. It contributes to the search for lower-carbon c…
Nam-Wook Kim
A materials study evaluating chloride penetration resistance and service life of low-carbon marine concrete using an improved ternary cement system. It examines whether cement-related CO2 reduction can be balanced with durability in marine …
Yiru Jia, Yue Lu, Sheng Fu +1
This study examines urban community gardens as a vehicle for low-carbon behaviour, exploring how governance arrangements, interventions, and participant motivations interact. Authored at Beijing Forestry University, it offers insights into …
Mujeeb ur Rehman, Hai Liu, Zhihong Fan +2
This study develops low-carbon synchronous grouts for shield tunnels by combining limestone calcined clay cement (LC3) with nanosilica, evaluating rheology and hydration behavior. It aims to reconcile CO2 reduction from cement substitution …
Angonese A.R.
This work examines greenhouse gas mitigation at a pig farm through anaerobic digestion. It centers on capturing biogas from livestock manure to cut methane and other emissions, though no abstract is available to confirm methods or results. …
Renju C. M.
Cement production causes about 7% of global CO2 emissions. This paper compares fresh and hardened properties of M30-grade ordinary Portland cement concrete with one-part geopolymer concrete, which replaces hazardous liquid sodium hydroxide …
Sudipta Adhikary, Paramita Bhattacharyya
This study evaluates polymer-modified fly ash concrete (PMFAC) for durability, resource efficiency, carbon reduction and life-cycle performance. Polymer–fly ash synergy improves microstructure, interfacial bonding, crack resistance and impe…
Ebailila M.
A materials study on stabilising sulfate-bearing soils using lime blended with ground granulated blast furnace slag (GGBS) and metakaolin, aiming to cut the carbon intensity of ground improvement. It targets replacing cement-based binders w…
Kim S.
This study conducts an environmental life cycle assessment (LCA) of a novel cultivated meat burger patty in the United States. Without an available abstract, specific findings cannot be confirmed, but the work likely quantifies GHG, energy,…
Nevin Karamahmut Mermer
Cement production accounts for 8% of global CO2 emissions, and concrete debris disposal is a growing concern. This study applies alkali fusion to extract silicon from hydrated cement phases in construction debris, synthesizing mesoporous SB…
Rema Rajendran, S. P, J. J +1
This study integrates graphitic carbon nitride (g-C3N4), a visible-light photocatalyst, into cement mortar to break down airborne pollutants and enable self-cleaning surfaces. Waste-derived glass powder is added as a supplementary cementiti…
Adéla Jiříčková, Adéla Kubištová, Ondřej Jankovský +7
This study develops and characterizes a 3D-printable magnesium oxychloride cement (MOC) composite as a lower-embodied-energy, lower-CO2 alternative to Portland cement. Ground granulated blast furnace slag replaces silica sand as filler, pro…
Sun Z.
This study builds an integrated geomechanical coupled reservoir model for co-production of tight gas and deep coalbed methane, with a parameter sensitivity analysis. It offers engineering insight for hydrocarbon recovery efficiency, though …
Stefania Mattea, Nicola McDonald
This study examines demand-side drivers for low-carbon concrete adoption in construction. It argues that provenance transparency, third-party certification, and cultural legitimacy are decisive for uptake, shifting attention from supply-sid…
Vahid nezamivand chegane
This paper proposes the 3-7-12 Environmental Resilience Framework, treating waste, greenhouse-gas emissions, and ecological degradation as a coupled systems problem. Built on three pillars, seven functional stages, and twelve indicators, it…
Mumini Damilola Osuolale, Juliana Felkner
Using PLS-SEM on survey data from Nigeria's AEC sector, this study examines how established barrier constructs relate to self-reported adoption of sustainable construction materials. Only regulatory complexity and performance uncertainty wa…
Maria Bourazani, Maria S. Chrysi, Despoina Pappa +2
This paper examines organizational strategies to cut the carbon footprint of anesthesia and perioperative departments. It maps emission sources such as inhaled anesthetics and single-use devices, and organizes reduction measures spanning pr…
Mohammed Ismaeil, Nejib Ghazouani, Mohamed Hechmi El Ouni
A study on low-carbon ultra-high-performance concrete (UHPC) that uses chromite smelting slag as both a supplementary cementitious material and an internal-curing aggregate. It proposes a material design that cuts cement demand and CO2 emis…
Hang Yu, Yafeng Qian, Wenjing Xia +1
This study uses molecular dynamics simulations and macro/micro experiments to clarify the compatibility and interaction mechanisms between fly ash–slag-based geopolymer (FASGG) and SBS-modified emulsified asphalt. N-A–S–H shows superior com…
Innocent Ngare, Isaac Kipkemoi, Ogechi Adeola +8
This study examines Green Innovation Hubs (GiHUBs) as vehicles for sustainable development, focusing on youth engagement via higher education, reskilling, and curriculum integration. It reviews green social innovation and intelligent energy…
Browse by Topic