This page provides an English interface to the gxceed GX paper corpus. The corpus aggregates papers from 13 open scholarly metadata sources and uses AI-assisted classification to identify signals related to measurement, policy narratives, outcomes, implementation, industrial adoption, and verification.
The goal is not only to discover papers, but to observe how GX research is distributed across research substance, implementation narratives, external expectations, implementation substance, and judgment formation.
Summaries are AI-assisted. Always refer to the original paper for authoritative conclusions.
Showing 81–100 of 979 papers
Violeta Sànchez i Nogué, Sybil Sharvelle, Lucas Loetscher +1
Proposes ReSOURCE, a future carbon-negative biorefinery that removes CO2 from the atmosphere using biomass and carbon capture, while co-producing renewable energy and valuable products.
Muhammad Hammad Rasool
This paper examines drilling engineering challenges for carbon storage (CCS), focusing on injection well design, well integrity, and long-term sealing from a technical perspective.
Scott Melnyk, Lauren P. Birgenheier, Michael D. Vanden Berg +3
This paper evaluates sedimentological controls on reservoir heterogeneity in the Jurassic Entrada Sandstone for geologic carbon storage. It identifies four architectural elements (large compound dunes, small compound dunes, simple dunes, da…
Yue Wang, Hossein Babaei
This study investigates a carbon-integrated direct DME production system using internal CO2 looping as a thermodynamic design variable. Ten configurations at 5000 MTPD capacity were evaluated with two H2/CO ratios and controlled CO2 recycli…
Zhicong Wu, Junxian Wu, Fenglin Zhang +1
This paper presents a thermodynamic and economic analysis of a novel biomass oxy-fuel combustion system that co-produces power and methanol, incorporating cryogenic carbon capture and recycle of purge gas. The study evaluates efficiency and…
Tehseen Ullah, Sadiq ur Rahman, Sumayya Fayyaz +1
This study synthesized a novel POM-132@MOF-5 composite for CO₂ capture. Characterization via FTIR, XRD, SEM, and EDS confirmed successful integration. CO₂ adsorption tests at 273 K and pressures from 0.5 to 2.5 bar showed a capacity of 25 m…
Jason A. F. Sherman, Anca Ostace, Douglas A. Allan +1
This work applies robust optimization (PyROS) to design a monoethanolamine-based post-combustion carbon capture process under uncertainty. It achieves risk-averse designs for CO2 capture rates from 90% to over 99%, with solutions up to 98% …
Leandros Paschalidis, Kai Fabian Kruber, Simon Müller +1
This paper examines the steam barrier as a design constraint in carbon capture and explores pathways to low-temperature regeneration, potentially improving CCUS efficiency.
Sen Zheng, Yuanxun Zheng, Feng Long +2
This paper provides a comprehensive review of carbon-sequestering engineered cementitious composites (ECC) for low-carbon construction, covering mechanisms, performance, and sustainability implications, highlighting their potential as a CCU…
Pengxiang Wang, Lei Wang, Haibin Tang +6
This study fabricates a 3D interconnected silver nanowire array self-supporting membrane using a 3D anodic aluminum oxide template. It achieves a maximum Faradaic efficiency of 97.28% for CO and a high current density of 59.06 mA cm⁻² in an…
Peter McNeice, Andreas J. Vorholt
This paper advocates for uniting efforts to produce green carbon chemicals using CO2 from renewable sources, aiming to contribute to decarbonization. Specific findings are not available from the abstract, but the concept supports circular c…
Yifan Liu (219681), Zezhi Liu, Yitian Zhou +2
This paper reports a method using nitrogen-doped carbon nanotubes to regulate nickel nanoparticles for efficient electrochemical CO2 reduction, contributing to carbon utilization technology.
Fanlu Min, Bingzhi Li, Nan Zhang +4
This study analyzes carbon fixation and emissions from MgO-based carbonation treatment of shield tunneling sludge clay. It evaluates the CO2 sequestration effect of MgO as a solidification agent, suggesting potential for carbon-negative tec…
Gabriel M. Rubinstein, Stephen Wallace
This paper explores the potential of using waste carbon as synthetic feedstock. Although specifics are unclear, it contributes to a circular carbon economy.
Stephen Wallace
This paper explores the importance of carbon loops in sustainable biomanufacturing, focusing on how carbon loop technologies can reduce CO2 emissions and improve resource efficiency.
Polly Sturgeon, Ashley Douds, Valerie Beckham-Feller +5
Indiana has deep bedrock reservoirs, a history of industrial emissions, and an evolving regulatory environment, making it a key region for carbon sequestration. Cambrian- and Ordovician-age bedrock units show potential for commercial-scale …
Zhao S.
This paper investigates the synergistic role of short-chain sulfur and single-atom catalysts for low-temperature mercury removal in post-combustion CO2 capture. Mercury can poison CO2 capture solvents, so its removal is critical. The study …
Triwigati P.T.
This study investigates a pH swing carbon mineralization process using steelmaking slag for simultaneous CO2 sequestration and recovery of valuable elements. It aims to integrate industrial waste valorization with carbon capture and storage…
Nathalie Becker, Franziska Hufnagel, Paul Bolay +8
This paper demonstrates a novel regulatory metabolic engineering strategy in cyanobacteria (Synechocystis) by controlling the PirC-PGAM interaction to redirect carbon flux from the Calvin-Benson-Bassham cycle towards desired products. The a…
Burba G.
This paper provides a comprehensive overview of the eddy covariance method for CO2 emission measurements in CCUS applications, covering principles, instrumentation, and software. It demonstrates the applicability of this monitoring techniqu…
Browse by Topic