This page provides an English interface to the gxceed GX paper corpus. The corpus aggregates papers from 14 contributing scholarly metadata sources and uses AI-assisted classification to identify signals related to measurement, policy narratives, outcomes, implementation, industrial adoption, and verification.
The goal is not only to discover papers, but to observe how GX research is distributed across research substance, implementation narratives, external expectations, implementation substance, and judgment formation.
Summaries are AI-assisted. Always refer to the original paper for authoritative conclusions.
Showing 15341–15360 of 31675 papers
2010年度フォローアップ調査結果（2009年度実績）と温暖化対策関連情報
(著者不明)
This document summarizes follow-up survey results for FY2010 (actual results for FY2009) and related information on global warming countermeasures. It serves as a basic resource for understanding the progress of global warming measures in J…
2009年度フォローアップ調査結果（2008年度実績）と温暖化対策関連情報
(著者不明)
Reports the results of a follow-up survey conducted in FY2009, summarizing FY2008 performance and information on global warming countermeasures.
重油からの燃料転換
(著者不明)
This study examines the transition from heavy oil to cleaner fuels, analyzing technical and economic aspects, CO2 reduction potential, and implementation barriers. It provides foundational insights for promoting fuel switching in Japanese i…
地方都市における静脈系インフラの集約と連携のシナリオ構築 －和歌山市を対象として－
(著者不明)
This study constructs scenarios for consolidating and coordinating venous infrastructure (waste treatment, recycling, sewage) in Wakayama City, aiming to improve resource circulation efficiency and reduce environmental impact.
発電設備による省エネ・CO<SUB>2</SUB>削減事例
(著者不明)
This paper presents case studies of energy saving and CO2 reduction through improvements in power generation equipment. It provides practical insights for industrial decarbonization, demonstrating the concrete effects of efficiency enhancem…
ライフサイクルの視点に基づく環境ホットスポット分析
(著者不明)
This paper presents a method for environmental hotspot analysis using life cycle thinking. It identifies key environmental burden stages across the entire product lifecycle, supporting efficient improvement planning. Applicable to corporate…
ユニフォームのリサイクルとLCA
(著者不明)
This paper examines the recycling and life cycle assessment (LCA) of uniforms. No abstract is available, so specific findings are unknown.
垂直軸風車の流れ解析(2)
(著者不明)
Technical report on flow analysis of a vertical axis wind turbine, part 2, examining fluid dynamics characteristics.
風力発電の運用・修繕における環境負荷の見積もり
(著者不明)
This paper proposes a method to quantitatively estimate the environmental load during the operation and maintenance (O&M) phase of wind power generation. From a life cycle assessment perspective, it evaluates CO2 emissions and resource cons…
調理方法に注目した食品の環境影響評価
(著者不明)
This paper evaluates the environmental impact of different cooking methods, comparing energy consumption and greenhouse gas emissions. It provides insights for sustainable cooking choices in households and restaurants.
ライスインキを用いた印刷物の環境影響評価
(著者不明)
This paper reports an environmental impact assessment of printed materials using rice ink. It examines the potential of rice-derived ink to reduce greenhouse gas emissions compared to conventional petroleum-based inks. Although details on m…
環境配慮型フリーペーパーのカーボンフットプリント
(著者不明)
This paper calculates the carbon footprint of environmentally friendly free paper and compares it with conventional free paper. It quantifies GHG emissions across the lifecycle from raw material procurement to disposal, assessing how eco-fr…
ライフサイクル思考による千葉県銚子産メロンを用いた環境教育プログラムの効果
(著者不明)
This paper examines the effect of an environmental education program incorporating life cycle thinking, using melons from Choshi, Chiba Prefecture as a case study. It evaluates the program's effectiveness in teaching environmental impacts f…
千葉県東総地域産うるち米のカーボンフットプリントの試算
(著者不明)
This study estimates the carbon footprint of non-glutinous rice from the Toso region in Chiba Prefecture, Japan. It quantifies the environmental load of a local agricultural product, providing baseline data for decarbonization in the agricu…
水なし印刷物の環境影響評価からカーボンオフセット⁄カーボンフットプリントへの展開
(著者不明)
This paper evaluates the environmental impact of waterless printing technology and explores its application to carbon offset and carbon footprint. It suggests waterless printing as a means for decarbonization in the printing industry.
静岡県富士市で製造された衛生用紙のCFPの試算
(著者不明)
This paper presents a trial calculation of the carbon footprint (CFP) of sanitary paper manufactured in Fuji City, Shizuoka Prefecture, Japan. Using manufacturing process and raw material data, it estimates greenhouse gas emissions and prop…
タイプ_III_環境ラベルプログラム「エコリーフ」の現状分析と展望
(著者不明)
This paper analyzes the current state of Japan's Type III environmental label program "EcoLeaf" and discusses its future prospects. EcoLeaf discloses comprehensive environmental information across a product's life cycle and is used for corp…
うどんのカーボンフットプリント
(著者不明)
This study calculates the total greenhouse gas emissions across the life cycle of udon, a staple Japanese food, covering raw material procurement, production, distribution, and consumption. It quantifies the carbon footprint of udon and ide…
電子メディアと紙メディアの書籍の環境影響
(著者不明)
This study compares the environmental impacts of e-books and paper books from a life cycle assessment perspective. It evaluates resource consumption and carbon footprint to clarify differences in environmental loads between the two media. T…
<b>使用済み紙おむつのリサイクルによるパルプ再利用の環境影響評価</b><b> </b>
(著者不明)
This study assesses the environmental impact of recycling used disposable diapers to recover and reuse pulp. It analyzes greenhouse gas emission reductions and energy consumption from a waste reduction and circular economy perspective. Alth…
Browse by Topic