This page provides an English interface to the gxceed GX paper corpus. The corpus aggregates papers from 14 contributing scholarly metadata sources and uses AI-assisted classification to identify signals related to measurement, policy narratives, outcomes, implementation, industrial adoption, and verification.
The goal is not only to discover papers, but to observe how GX research is distributed across research substance, implementation narratives, external expectations, implementation substance, and judgment formation.
Summaries are AI-assisted. Always refer to the original paper for authoritative conclusions.
Showing 241–260 of 2097 papers
Liang-Min Xiong, Cong Ma, Jian-Feng Guo +5
A study on electrocatalytic systems that couple CO2 reduction with alcohol oxidation. By pairing CO2 conversion to value-added chemicals with anodic alcohol oxidation, the approach aims at more energy-efficient electrolysis. It contributes …
Grant Charles Mwakipunda, Long Yu, Junwei Huang +2
This review systematically synthesizes recent advances in CO2 sequestration in deep saline aquifers across experiments, simulations, pore-scale analyses, and field applications. It evaluates trapping mechanisms (structural, residual, solubi…
Haif Aljomard, Abrar Inayat, Farrukh Jamil +3
This study co-valorizes spent coffee grounds and PET waste into KOH-activated carbon for CO2 capture, evaluating adsorption performance and underlying mechanisms. It links waste upcycling with carbon capture materials, though no abstract is…
Xu Wang, Qianqian Guo, Quan Huang +3
This work reuses nitrogen from the hydrothermal aqueous-phase waste stream to synthesize N-doped activated carbons for CO2 capture. It links waste valorization with carbon-capture materials, though no abstract is available to confirm perfor…
Jinhua Zhang, Xun Chen, Zhen-tao Zhang +4
MEA-based CO2 capture from coal flue gas is limited by high regeneration energy. Using Aspen Plus, four progressively enhanced configurations were modeled, integrating lean-rich heat exchange with mechanical vapor compression at both desorb…
Mingyang Yin, Xiao Chen, Yuyan Chen +1
A novel phase-change absorption system using AEEA/NHD/H2O aims to capture CO2 with high efficiency and low energy consumption. Phase-change solvents can cut regeneration energy, potentially lowering CCUS cost barriers. No abstract is availa…
A. Ređep, Tibor Bešenić, X. Wang +2
This review examines the energy demands of deploying carbon capture, utilization and storage (CCUS) and the opportunities for integrating it with renewable energy. It highlights that CCUS is energy-intensive, so pairing it with renewables i…
Burunova, Margarita, Vetik, Iuliia, Stepanova, Anna +3
This paper presents an open, machine-readable dataset compiling standardized CO2 sorbent parameters from the literature up to 2026. It includes sorbent category, capture conditions, capacity, kinetics, cyclic stability, cost, and selectivit…
Yaxian Wang, Yuxin Chen, Jizhe Li
Using 3983 Chinese facilities and national oilfield/saline aquifer storage data, four CCS deployment scenarios compare point-to-point vs. clustered source-sink matching. Small-scale plants contribute 3.2 Gt CO2 abatement over 2030-2060; clu…
Symonds R.
This work presents a systematic approach to designing, modeling, and conducting techno-economic-environmental analysis of CO2 capture technologies within a National CCUS Assessment Framework (NCAF). It aims to standardize capture-technology…
Lothe A.E.
This paper proposes a framework for high-level technical screening of promising CCUS value chains at the regional level. It evaluates capture, transport, storage and utilization options against regional conditions to prioritize which chains…
Li Z.
An LCA study quantifying the co-benefits of CCUS in steel slag disposal. It evaluates simultaneous CO2 mineralization/sequestration and reduced environmental burdens from waste handling, linking steel decarbonization with circular resource …
Serikbolat K.M.
This work addresses carbon capture, utilization and storage (CCUS) applied to Kazakhstan's Tengiz oil field. It likely examines CO2 injection for enhanced oil recovery combined with storage, linking fossil-fuel production with emissions red…
Craig B.
This work presents guidelines for selecting corrosion-resistant alloys (CRA) for CCS and CCUS injection wells. It addresses material selection criteria for the corrosive CO2 injection environment, supporting long-term integrity and safety o…
Yu S.
This paper uses integrated assessment modeling (IAM) to examine the role of CCUS in China's climate mitigation strategy. It assesses how carbon capture, utilization and storage contributes to China's decarbonization pathways, its interplay …
Drustrup R.
This paper examines current considerations around system integration in CCUS (carbon capture, utilization, and storage) initiatives across North European countries. With no abstract available, the exact scope is unclear, but the title sugge…
Uddin M.
This paper presents CCUS-agent, an agent-based modeling framework for analyzing multimodal CO2 transportation (pipelines, ships, trucks) for carbon capture, utilization, and storage. It simulates transport-network design, operational decisi…
Aras C.M.
This paper addresses the design and planning of multi-period CCUS infrastructure under uncertainty. It offers a quantitative optimization framework for sequencing carbon capture, utilization, and storage investments. Though the abstract is …
Yuyao Xin, Yuanduo Li, Yujia Gao +4
This review systematically analyzes full-chain bottlenecks hindering industrial-scale electrocatalytic CO2 reduction (CO2RR). It examines challenges across four core modules—catalysts, electrolysis systems, product separation, and system in…
Marco Gigantino, Stefano Mingolla, Lorenzo Rosa +2
A modular solar-powered unit converts crop residues and manure into stable solid carbon via anaerobic digestion, biomethanation and methane pyrolysis. A coupled mass-energy-cost model applied on a 5-arcminute global grid yields solid-carbon…
Browse by Topic